Chlordioxid-Anlage mit Legionellen 500
1 Jan 2019

Seminar chlorine dioxide generators

by | posted in: Chlorine dioxide, Seminars | 0

Seminar for measurement of disinfectants in water with the following contents: Introduction water disinfection, Measurable disinfectant, Connection pH and disinfecting action of chlorine and bromine, Principle of amperometric measurement with and without membrane, Construction membrane-covered sensors, Conditions of measurement, Cross-sensitivities, Causes of any disturbance of the measurement, Signal transmission and signal types, Calibration of the connected controller, Maintenance and reconditioning of the electrochemical system of sensors.

PBT 06 Bild 01 Monitor
1 Jan 2019

Seminar controller DCW400ip – INTERNET OF WATER

by | posted in: Internet of water, Seminars | 0

Seminar zu Regler DCW400ip – INTERNET OF WATER; Introduction water disinfection, Measurable disinfectant, Connection pH and disinfecting action of chlorine and bromine, Influence of trichloro-isocyanuric acid on the measured value, Conventional methods for producing chlorine dioxide, Signal extracting with different sensor types, Available modules for the device and available measurement parameters, Connecting the device to the Internet, Advantages of the internal Web server, Activation of the modules, Setting of the sensor to the module, Configuration of the controller, Output configuration, Configuration of target value, Warning levels and alarm levels, Calibration of the instrument and the DPD measurement configuration of the timer functions, Configuration of all inputs on the main board and use of data, User Management, Email Management, evaluate statistical data,

Membranbedeckter Sensor 500
1 Jan 2019

Seminar membrane-covered amperometric sensors

by | posted in: Membranbedeckte amperometrische Sensoren, Seminars | 0

Seminar for measurement of disinfectants in water with the following contents: Introduction water disinfection, Measurable disinfectant, Connection pH and disinfecting action of chlorine and bromine, Principle of amperometric measurement with and without membrane, Construction membrane-covered sensors, Conditions of measurement, Cross-sensitivities, Causes of any disturbance of the measurement, Signal transmission and signal types, Calibration of the connected controller, Maintenance and reconditioning of the electrochemical system of sensors.

PBT 06 Bild 01 Monitor
10 Jun 2018

Let's start the INTERNET OF WATER!

by | posted in: Disinfection, Measurement and control, Pools and water treatment | 0

Internet of things is literally on everyone's lips, and describes, such as the Internet in equipment has arrived. In our industry, you might think, IOT aviod the pools. We should change that together! Maybe it just needs a new slogan for it, as industry 2.0 or GroKo (german for big Coalition), in which the name is more powerful than the content. The chemical basis for disinfection have not changed significantly, we will address these fundamentals. How can a own Internet of water build up in each pool , but will play a major role in the following.

Evolution der Sensoren 500
30 May 2018

The advantages of membrane-covered amperometric sensors

by | posted in: Selecting a membrane-covered amperometric sensor, Disinfection of water, Tutorials | 0

If we talk about disinfection, then most people immediately think of "chlorine". Here is often overlooked, that chlorine in different forms occurs. While the right eye can be protected by "free chlorine" for infections, is the left eye may be the result of bounded chlorine and his children in the air. This bound chlorine is the reason for the bad taste and smell in the air - but has very little to do with the disinfection or our protection. Membrane-covered sensors can also detect this kind of chlorines.
29 May 2018

The selection of membrane-covered amperometric sensors

by | posted in: Selecting a membrane-covered amperometric sensor, Disinfection of water, Tutorials | 0

Tutorial to choose Membrane covered amperometric sensors with detailed explanations of the parameters. In this table, you can select the correct sensor. In the footer of the table filter can be written, which restricts the number of rows. Please also note the informations, which will be displayed in the right columns by horizontal scrolling. Find out in the fields measuring size, Subgroup, Measuring range, Measuring water, Pressure, pH range, Temperature, Cross sensitivity, Reaction time, Connections, Downloads, about the existing possibilities and conditions.

Chlorgranulat Fotolia_27329031_S
24 Dec 2017

Free chlorine 03 of calcium hypochlorite

by | posted in: Disinfection of water, Free chlorine, Tutorials | 0

The dosage of solid calcium hypochlorite Ca(ClO)2 it's easier … because it contains a higher proportion of free chlorine and does not disintegrate under favorable conditions. Calcium hypochlorite is the calcium salt of hypochlorous acid with the chemical formula Ca(OCl)2. After the gaseous and liquid products, the first solid chloro-product is treated here. Calcium hypochlorite Ca(ClO)2 according to DIN EN 900 is commercially available as an chlorine preparation in the form of tablets or granules. Roof DIN it contains at least 65 % Chlorine.

Trichloriscyanursäure
23 Dec 2017

Free chlorine 04 of trichloroisocyanuric

by | posted in: Disinfection of water, Free chlorine, Tutorials | 0

The use of trichloroisocyanuric acid tablets … usually takes place there, where no measurement- and control system is available. Trichlorisocyanuric acid (completed: chlorinated isocyanurates) is an organic chlorine product, that works as a depot for free chlorine. The advantage of using trichloroisocyanuric, a permanent (Re-) dosage be unnecessary, is bought with significant measurement errors and mistakes.

1 2
error: Content is protected !!